Description

FSP180-50MP 180W POWER SUPPLY For SPI FLEX ATX BALL-BEARING FAN

FSP180-50MP
Input Characteristics
Input Range: 90-265V AC, Full Range Input
Frequency: 47-63Hz
Input Current: 4A (RMS) at 115V AC, 2A (RMS) at 230V A
Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
Output Characteristics
Output Voltage/Minimum Load/Maximum Load/Load Reg./Line Reg./Ripple and Noise
+3.3V/ 0.3A /16.8A /+/- 5% /+/- 1% /50mV P-P
+5V/ 0.3A /12.0A /+/- 5% /+/- 1% /50mV P-P
+12V/ 1.5A /12.0A/ +/- 5% /+/- 1% /120mV P-P
-12V /0.0A /0.8A /+/- 10% /+/- 2% /120mV P-P
+5Vsb/ 0.0A /2.0 A /+/- 5% /+/- 1% /50mV P-P
Dielectric Withstand:
Input to frame ground 1800V AC for 1 second

Efficiency:
68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time:
Less than 20ms

Hold-up Time:
17ms minimum at nominal input voltage

Power Good Signal:
Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current:
Not exceed 0.5mA at 264V AC, 50Hz